OPTIKA (CLD01+CL-11.1) 2-arm fibre optic LED light

OPTIKA (CLD01+CL-11.1) 2-Arm LED Cold Light Source

Very powerful gooseneck illumination based on daylight LEDs. With brightness control.

Consisting of two separate components: an LED cold light generator (CLD-01) and the matching double-arm guide for CLD-01 with focusing lenses (CL-11.1).

LED Cold Light Generator (CLD-01):

• Flexible and professional cold light illuminator with a high-power, highly efficient 14-W LED system, extremely bright and uniform
• Light source: High-power 14-W LED
• Chromaticity coordinates (x,y): 0.320, 0.320 (pure white, 6,300 K)

Optical performance (with double-arm)

• Illuminance (at 10 cm distance): 70,000 lux

Power supply

• Brightness control via potentiometer
• External power supply included
• Input: 110/240 V AC, 50/60 Hz; Output: 6 V DC, 5 A

Double-Arm Guide with Focusing Lenses (CL-11.1):

• Arm length: 500 mm
• Each arm: Equipped with a focusable lens adapter
• Illuminance (at 10 cm distance): 100,000 lux

Application Instructions:

Device Environment
This device should be used in a clean, dry, and shock-free environment with a temperature range of 5°–40°C and a maximum relative humidity of 85% (non-condensing). Use a dehumidifier if needed.

Cleaning the Optics

• If optical components need cleaning, first try using compressed air.
• If this is not sufficient: Use a soft, lint-free cloth with water and mild detergent.
• As a final option: Use a cloth dampened with a 3:7 mixture of ethanol and ether.
  Note: Ethanol and ether are highly flammable liquids. Do not use them near heat sources, sparks, or electrical equipment. Work in a well-ventilated room. Remember never to wipe optical surfaces with bare hands. Fingerprints can damage the optics.

Legal Notes

Safety:
We accept no liability for damages caused by improper and/or non-recommended use. Please carefully check the suitability of the product before alternative use.

Important Notes During and After Use

• The device should always be kept vertical during transport to prevent moving parts from falling out.
• Never handle the device improperly or apply unnecessary force.
• Never attempt to service or repair the device yourself.
• After use, immediately turn off the light, cover the device with the provided dust cover, and store it in a dry and clean place.

Electrical Safety Precautions

• Before connecting the power supply, ensure the regional voltage matches the operating voltage of the device and that the lamp switch is in the OFF position.
• Users must comply with all regional safety regulations.
• The device has the CE safety label, but users are fully responsible for safe operation.

If you need to send the device for maintenance, please use the original packaging.

Manufacturer Information According to EU Regulation 2023/988
OPTIKA S.r.l.
Via Rigla, 30
24010 - Ponteranica (BG) - Italy
E-Mail: info@optikamicroscopes.com