OPTIKA CL-33 2-arm fibre optic LED light

Pair of arm illuminators with magnetic fixing plates, metal base, USB.

Light sources: LED; With 2W high efficiency LEDs.
Color temperature: pure white 6,300 K;
Luminous flux: 200 lm (x2);
Illuminance: 20,000 (on 5 cm diameter) (x2).

Made in Italy.

Instructions for Use:

Device Environment
This device should be used in a clean, dry, and shock-free environment with a temperature range of 5°-40°C and a maximum relative humidity of 85% (non-condensing). Use a dehumidifier if necessary.

Clean the device with a dry cloth. Do not use any solvents.

Legal Notices

Safety:
We do not accept liability for damage caused by improper and/or non-recommended use. Please carefully assess the suitability of the product before any alternative use.

Charge the battery immediately after purchase, after each use, and, if not used frequently, at least every 6 months.

• DO NOT turn on the LED light while it is being charged.
• DO NOT handle or move the LED light while it is being charged.
• DO NOT look directly into the light beam or point the light directly into the eyes of people or animals.
• Avoid the use of the LED light by children.
• DO NOT use the LED light if it has received a shock, been dropped, or damaged in any way. In such cases, contact a qualified service technician.
• DO NOT leave the battery in a discharged state for an extended period.
• DO NOT use the LED light with a charger that has a damaged cable or plug. Replace the cable or plug immediately.
• ALWAYS use a USB charger rated at 5V, 1A.
• DO NOT disassemble the LED light: servicing or repairs should only be performed by qualified personnel. Incorrect reassembly may pose a fire hazard.
• DO NOT crush, puncture, short external contacts, or dispose of the battery in fire or water.
• DO NOT expose the battery to temperatures above 60°C.
• Recycle or dispose of used batteries in accordance with local regulations.
• If electrolyte from the battery comes into contact with your skin, wash thoroughly with soap and water. If it gets into your eyes, rinse immediately with water and SEEK MEDICAL ATTENTION.

Important Guidelines During and After Use

• Never mishandle the system or apply unnecessary force to it.
• Never attempt to service or repair the system yourself.

Electrical Safety Precautions

• Before connecting the power supply, ensure that the supply voltage in your region matches the operating voltage of the device and that the lamp switch is in the off position.
• Users must comply with all safety regulations applicable in their region.
• The device carries the CE safety label. However, users are fully responsible for ensuring safe operation of the device.

If you need to send the system to Optika for maintenance, please use the original packaging.

Manufacturer Information in Accordance with EU Regulation 2023/988

OPTIKA S.r.l.
Via Rigla, 30
24010 - Ponteranica (BG) - Italy
Email: info@optikamicroscopes.com